Do you know what camcorder is this? Do you like this camcorder?
This is the Sony NEX-FS700, It is equipped with a new 4K Exmor Super 35 CMOS sensor (Total 11.6 million pixels) capable of cranking at up to 960 frames per second. The Sony NEX-FS700 additionally features built-in ND filters, with a newly designed wheel that rotates across the sensor like a turret. The wheel includes positions for Clear, 1/4 (2 Stop), 1/16 (4 Stop), and 1/64 (6 Stop). Furthermore, the NEX-FS700's 3GHD-SDI and HDMI connectors can output Full-HD 50p and 60p, in addition to standard HD 60i, 24p, 25p or 30p frame rates with embedded time code and audio.
The camcorder delivers Full-HD quality images at 120 and 240 frames per second in an 8 or 16 seconds burst mode respectively. The NEX-FS700's high sensitivity and low noise shooting capability makes super slow motion shooting more convenient without additional equipment. 480 fps and 960 fps rates at reduced resolution are available for faster frame rate recording.
Able to shoot full 1080p video in a range of frame rates up to 60p, the FS700 provides the option of recording AVCHD footage onto SD card/MemoryStick or via the FMU (flash memory unit) port, or it can output 4:2:2 video (with embedded timecode) via HDMI 1.4 or 3G/HD-SDI to an external recording unit.
After you shoot video with this camcorder, How can you import Sony NEX-FS700 AVCHD to iMovie for editing for iMovie is not compatible with the mts/m2ts file.
To import the Sony NEX-FS700 AVCHD footages to imovie or final cut pro, you can get a video converter to help you transfer Sony NEX-FS700 AVCHD to FCP or iMovie format. Doremisoft AVCHD video converter do the job well. You can import all your video into the converter to change the video file format. With it, import sony nex 5 video mac and convert EA50EH MTS to Apple ProRes for FCP also will be a pice of cake. You can learn the detail on how to convert Sony NEX-FS700 AVCHD to FCP compatible format.
First, get an AVCHD video converter for mac installed into your Mac. Run it, click "Add File" button to load the video into the converter.
After loading, you can change the video position and edit the video, if you do not need to do these, you can set the output format by hiting "Common Video" > "Profile" to choose "MOV-QuickTime (*.mov)" as the output format.
After that, you can start to launch the conversion. just press the big purple "START" button on the bottom right of the panel.
If you want to convert flv to html5 video format or convert Canon C501 MXF to Apple ProRes you can choose the video converter from Doremisoft. This converter will give you a nice trip.
No comments:
Post a Comment